Ultrathin Soda-lime Glass

Our ultra-thin soda-lime glass is produced via the float process which guarantees optimal surface flatness, minimal variation in thickness (wedge), excellent surface quality and, within a single batch of glass, lower thickness tolerances than those obtained through any other manufacturing process.

Features

  • Can be chemically tempered to increase mechanical strength
  • Float process assures excellent flatness, thickness tolerances and surface quality
  • Base material for most non-glare chemically-etched glass
  • Can be ground and polished down to tighter thickness tolerances


Available Thicknesses

   
Thickness Range
   
Inch
mm
Nominal Size
Traditional
Designation
Min.
Max.
Min.
Max.
.016”
.4mm
.013
.017
.35
.45
.022”
.55mm
.019
.023
.50
.60
.028”
.70mm
.025
.029
.65
.75
.033”
.85mm
.031
.035
.80
.90
.037”
.95mm
.035
.039
.90
1.00
.043”
1.1mm
.041
.045
1.05
1.15
.048”
1.25mm
.047
.051
<1.20
1.30
.063”
1.6mm
.059
.066
1.50
1.70
.075
1.9mm
.070
.078
1.80
2.00


Mechanical and Thermal:  
Specific Weight: (106Kg.m-3) 2,483 g/cm3
Modulus of Elasticity (Young's):   70+/-2GPa
Thermal Coefficient of Expansion (0/300 °C): 84 x 10 -7/° per C
Strain Point: 490+/-10°C
   
Optical:  
Refractive Index: 1.523
   
Electrical:  
Dielectric Constant @ 25°C; 1 MHz E= 7.75
Specific Resistivity: @ 25°C; 1000Hz 9.7 (Ωcm)
   
Chemical:  
Hydrolytic resistance: class 3

 

Typical Applications

  • Electronic Displays
  • Optical/Coating Substrates
  • Medical
  • Special Mirrors (cosmetic, photographic, automotive)
  • Touch Screens
  • Hand-Held Displays
  • Wafer Substrates


JNS Glass and Coatings is not limited to any specifications or spectral curves shown on our website. 
Please let us help you design the coating or select the glass that is right for your application! 
Fabrication tolerances and spectral tolerances all conform to the specifications to be agreed upon by JNS Glass and Coatings and the customer.